Camper Seat Panel BLEIBTDRAN

The Plug-And-Camp System for Seat Consoles BLEIBTDRAN!

Plastic coverings for the seat consoles are rarely attractive ex works.

It is hardly possible to fit anything else on them. When retrofitting swivel consoles, the original trim above the console tends to get in the way ...
The space under the seat consoles is popular as additional storage space for e.g. the high-visibility waistcoats and the on-board tools, for a safe for depositing or even an additional battery and electrics.

With the VANZEIT ® trim BLEIBTDRAN for the console on the driver's seat and passenger seat of VW T5 and T6 as well as T6.1 you get a beautiful AND functional cover.
There is plenty of space for your bus accessories on the flat, continuous front of BLEIBTDRAN.

All variants are perfect for do-it-yourselfers and are easily interchangeable with the plastic cover from the factory:
Just pull the plastic off the BLEIBTDRAN and you're done - it fits directly with swivel brackets.

BLEIBTDRAN Uni models

The "Uni" version of the panelling comes to you with a continuous front.

In untreated multiplex board, you can design the console panelling as you wish, from the colour to the accessories fitted. However, it also looks quite chic when only waxed.

Alternatively in anthracite and soft-touch foiled, BLEIBTDRAN brings a discreet and aesthetic trim to the consoles in your bus. The soft-touch foiling gives the cover a velvety feel and protects the wood from dirt and moisture.

BLEIBTDRAN models with groove profile

With groove profiles, the variants of the covering of the driver's seat consoles correspond to the "Uni" models.

In addition, the models each have four groove profiles - groove 5, 160 mm each. In the untreated Multiplex panels the profiles are silver-coloured, in the foiled fronts black.

With slot nuts or hammer nuts, for example, you can attach luggage nets, Quickfist holders or similar to BLEIBTDRAN very quickly and easily.
More BUSSTOFF accessories are on the way ... Subscribe to the newsletter to be among the first to know when they are available in the shop.

Models of BLEIBTDRANfor electric extensions

In addition to the grooved profile versions, the models of the cladding for electrical extensions have a recess of 145 x 80 mm in the middle.
The recesses can be used to accommodate switches and sockets for USB, 12V and 230V, etc., using sheet metal or e.g. individual 3D printing.
BLEIBTDRAN can be secured at the back of the console to prevent it from being pulled in when used with earthed plugs etc: Well thought-out down to the last detail.

 For the standardised cut-out, your BLEIBTDRAN console extension comes with a matching cover that can be screwed on tightly. Inside the cover, you can then guide your components into the living space in the grid of your choice: Sugar.

Suitable camping electrics are on the way ...
Subscribe to the newsletter to be among the first to know as soon as it comes into the shop.

Suitable vehicle models

The fairing currently fits two variants of VW Buses and for the T5, T6 and T6.1 models:
(1) for the VW Bus with level floor, Transporter and Caravelle and
(2) for VW Buses with different floor levels between the driver's compartment and the living area - VW California, Multivan and buses with self-installed floors.

The maximum compensable floor level is about 3.5 cm (e.g. 3 cm floor and 0.5 cm covering).

With all this, the BLEIBTDRAN console panelling is also absolutely leasable!
It is simply plugged in without any screwing, gluing, bonding, etc. - Plug-And-Camp - original BUSSTOFF.

Tip: additional storage space can also be quickly created on the plastic trim panels:
Extra storage net on driver and passenger seat