Custom interior kit for two: DAPASSTWAS
Image of our LIEBLINGSPLATZ, made with VANRAILs
Camper base modules
Image of our LIEBLINGSPLATZ, made with VANRAILs
Image of our LIEBLINGSPLATZ, made with VANRAILs
Image of our LIEBLINGSPLATZ, made with VANRAILs
Camper self-construction for VW California
Custom interior kit for two: DAPASSTWAS
Image of our LIEBLINGSPLATZ, made with VANRAILs
Camper base modules
Image of our LIEBLINGSPLATZ, made with VANRAILs
Image of our LIEBLINGSPLATZ, made with VANRAILs
Image of our LIEBLINGSPLATZ, made with VANRAILs
Camper self-construction for VW California
Camper Self-Build Modules MV, Beach, Bus, black anodised
- BED
- for two
- MOVEMENT
- is continuous from front to back. You can access everything.
- SPACE
- at least 520 liters of storage space
- KITCHEN
- can be used indoors or outdoors. Cook wherever you like.
- COOLER
- we use a 35-liter one. For two people, we recommend at least 30 liters.
- TOILET
- can be removable or have a fixed spot.
- COMPACT
- When removed, the entire DIY build including boxes takes up less than 1 square meter.
- Metrics
- Length 2,000 mm, Width 1,200 mm, Height 700 mm,
Weight 26,00 kg
€ 1,499.99
Price incl. VAT, can differ in delivery country. Plus Shipping
Free Shipping
Free shipping
Available
All products are self-developed, personally used by us, and 100% practical.
Since 2016, our bus essentials are locally manufactured in Northern Germany. You can count on it 🤝
Optimal space for two in a short-wheelbase bus or mini camper
With just four lightweight modules, your everyday vehicle—whether it's a van, high-roof station wagon, minivan, or panel van—can be transformed into a comfortable camper for two in just a few minutes. The scalable layout and self-supporting storage make this possible.
The DIY conversion from daily driver to camper is effortless. Your weekend getaway or big holiday tour can begin.
These were our requirements for the self-build system …
Your equipment remains accessible at all times.
Entry and exit with the bed set up, so it can stay in place if needed.
Your gear, clothing, and provisions are always within reach.
Seats, doors, and the path to the tailgate remain unobstructed.
2-seater, 3-seater bench or up to two individual seats remain usable.
The featured DIY camper conversion modules in detail
1 Driver's side base, 2 Passenger's side base, 3 Multiboard / kitchen, 4 Cooler, 5 Water / toilet, 3+4 (front) form the sleeping area.
Safe on the road + sunshine while camping
Unobstructed all-around view in traffic and plenty of light while camping, as all system components remain below the window line.
Effortless installation, reconfiguration, and removal. Transform your daily driver into a campervan in minutes ... and back again.
With individual seats, camping for 3 or 4 people or a day trip is possible.
Space for everything, in the right place
Kitchen for indoors, outdoors, and everywhere in between. Cook wherever suits you best.
Multiple seating and reclining positions for ultimate relaxation.
Two additional sleeping spaces, and even a separating dry toilet fits in.
The scalable system modules are designed for:
- 30-liter cooler (in the "cooler and bed extension" combo module) or larger
- Separating dry toilet (in the "water" module), e.g., Boxio
Like all VANRAILs, the open t-slot profiles allow you to creatively design and customize your camper just the way you like it.
The VANRAIL (short VR) Camper System Modules for Your Conversion
VR System Base Driver Side
The DIY module holds two Euroboxes with 60 x 40 cm base dimensions on top. Below, boxes measuring 40 x 30 cm can fit, with up to four side by side. The height underneath is 190 mm.
VR System Base Passenger Side
On top of the module, three Euroboxes with 40 x 30 cm base dimensions fit. Below, for example, boxes measuring 30 x 20 x 17 cm can fit. You can store six of these and still have space behind for items like tarp poles.
VR Camper Multiboard Kitchen Module
Our multiboard is removable. You can use it as a table or cooking surface at the rear.
It can also be used as a bench, or hung as a spacious hanging table...
When placed between the two base camper modules, it becomes 2/3 of the bed support.
VR Camper Water and Composting Toilet Module
This module from the VANRAIL DIY system fits two 15-liter canisters, providing a total of 30 liters of fresh water.
Below, you can place a dry composting toilet - e.g., BOXIO. With the optional removable top, the toilet can stay right there.
VR Camper Combo Module Cooler + Bed Extension
Your cooler fits behind the foldable front of the combo module.
The front can be raised 90 degrees and fixed opposite the "Water" module.
This creates a continuous sleeping surface.
| Length | 2.000,00 mm |
|---|---|
| Width | 1.200,00 mm |
| Height | 700,00 mm |
| Weight | 26,00 kg |
| Installation Location: | inside, inside + outside |
| Number of sliding doors: | One sliding door, Two sliding doors |
| Suitable vehicles: | Ford Transit Custom, Nugget, Mercedes Sprinter, Renault Trafic, VW Caddy, VW Crafter, VW ID.BUZZ, VW Multivan ("T7"), VW Multivan California ("T7"), VW T4, VW T5, VW T5 California Beach, VW T5 Caravelle, VW T5 Multivan, VW T5 Transporter, VW T6, VW T6 California Beach, VW T6 Caravelle, VW T6 Multivan, VW T6 Transporter, VW T6.1, VW T6.1 California Beach, VW T6.1 California Beach Camper, VW T6.1 California Beach Tour, VW T6.1 Caravelle, VW T6.1 Multivan, VW T6.1 Transporter, VW new Transporter |
VANZEIT®
#organiceyourvan in no time at all: Plug-And-Camp set-up for your campervan.Still got questions about the product? Write us.
Illustrations and photos are similar, subject to change and errors excepted.
The VANZEIT ® Difference?
We think different.
Instead of average, with us, you get creative, practical, and durable setups from original ideas.
Our own camping experience is reflected in the attention to detail – and you’ll feel it in every use.
Trust in expertise for a relaxed time in your van!
🕐 New Product Ideas
A missing coat hook in our first California led to my invention: THE well-known hook for the pop-up roof, our ABHÄNG.
Why drill into your bus? From my incomprehension of this and the limited headroom under the existing roof cabinets, our EINFACH was born.
Every idea matures between my own ears, from actual need and missing solutions.
🕑 Thoughtful Product Design
Initial sketches turn into prototypes.
Once I'm convinced, I construct it using CAD, based on the already specific dimensions.
The design is then implemented with 3D printing and in the workshop, then being tested.
In the refinement process, I remove unnecessary parts from the design.
🕒Tested in Camping Life
Nicole and I take new accessories on tour directly with our bumblebee (aka T6 California Beach).
Is a contour not perfect, or is a feature not used while camping?
If so, it gets adjusted and tested again. And possibly again...
Only what convinces us over a season and proves its value gets produced.
🕓 Made in Northern Germany
We found our production partners within a few kilometers of us.
This guarantees short distances and quick, personal agreements by handshake.
Small series' production ensures fast adjustments, even with your suggestions.
🕔 Ensures More Freedom
Simple design integrates timelessly into your individual setup.
Focusing on the essentials gives you more space.
Less ballast means less fuel consumption. You go further.