Set of Hooks for a DIY Hanging Table on your Camper Van
All products are self-developed, personally used by us, and 100% practical.
Since 2016, our bus essentials are locally manufactured in Northern Germany. My word on it 🤝
The Qualities
- METRICS
- Length 600 mm, Width 28 mm, Height 36 mm, Weight 50 g
- COMPLETE
- Set for attaching the Hängetisch to the door
- DIY:
- Special hooks for your Vanbar
- HOLDS
- Each hook holds at least 10 kg. Holds a minimum of 20 kg for an outdoor table in pair.
- HOW?
- Your choice: With a strap and natural wood, it's charming; with a belt and HPL, it's stylish.
- FITS
- the doors on VW Bus T4, T5, T6, T7, ... and more.
- OF COURSE
- The sliding door can still be closed with our table hooks attached.
- EVEN THIS
- Breakproof and UV-protected, take it outdoors.
The VANZEIT ® Difference?
We think different.
Instead of average, with us, you get creative, practical, and durable setups from original ideas.
Our own camping experience is reflected in the attention to detail – and you’ll feel it in every use.
Trust in expertise for your relaxed VANZEIT ®!
🕐 New Product Ideas
A missing coat hook in our first California led to my invention of the well-known hooks for the pop-up roof, our ABHÄNG.
Why drill into your bus? From my incomprehension of this and the limited headroom under the market roof cabinets, our EINFACH was born.
Every idea matures between my own ears, from actual need and missing solutions.
🕑 Thoughtful Product Design
Initial sketches turn into prototypes made of cardboard.
Once I'm convinced, I construct it using CAD, based on the already specific dimensions.
The design is then implemented and tested with 3D printing, on the sewing machine, or in the workshop.
In the refinement process, I remove unnecessary parts from the design.
🕒Tested in Camping Life
Nicole and I take new accessories on tour directly with our bumblebee (aka T6 California Beach).
Is a contour not perfect, or is a feature not used while camping?
If so, it gets adjusted and tested again. And possibly again...
Only what convinces us over a season and proves its value gets produced.
🕓 Made in Northern Germany
We found our production partners within a few kilometers of us.
This guarantees short distances and quick, personal agreements by handshake.
Small series' production ensures fast adjustments, even with your suggestions.
🕔 Ensures More Freedom
Focusing on the essentials gives you more space.
Less ballast means less fuel consumption. You go further.
Simple designs integrate timelessly into your individual setup.
Organization with a system relaxes. Stuffing was yesterday, today you can safely stow your equipment - and find it again tomorrow.
Just attach your table to it ... and enjoy the bar next to your camper.
I made the hooks for your hanging table on the sliding door of the VW Bus T4, T5, T6 and T6.1.
The hooks are injection moulded from the same plastic as the connectors of the original rear carriers.
This makes them extremely stable and unbreakable.
Of course, they also fit perfectly on the door: sliding door, driver's door, passenger side ... hang the table where it suits you best.
The door can still be closed without any problems, even with the closing aid.
Hanging table with rope, natural & puristic
The set with rope (5 m in one piece) is lightweight and great for a simple do-it-yourself hanging table made from a wooden board or similar. Simply make four holes of ~5 mm in the corners, tie the weatherproof polyamide rope with a sturdy three and a half mm through each hook and the holes on one side. Done.
Tip no. 1: A felt edge protector or two rubber stoppers will protect the paintwork of your campervan.
DIY outdoor table with webbing, variable & compact packed
With the second set of 2 x 25 mm webbing and D-rings you are flexible.
Use the two hooks, for example, with the table during the day and for the fairy lights in the evening.
The hooks, table and strap can be stored separately to save space.
Tip no. 2: If you run the strap around the outside of your hanging table, you don't necessarily need another edge protector.
Each set includes two KLEMMT door hooks plus fastening (either 5 m rope or 2x 3 m belt incl. D-rings).
Length | 600,00 mm |
---|---|
Width | 28,00 mm |
Height | 36,00 mm |
Weight | 50 g |
Number of sliding doors: | One sliding door, Two sliding doors |
Suitable vehicle models: | Ford Transit Custom, Nugget, Hymer Crosscamp, Kompanja Campingbus, Mercedes Marco Polo, Mercedes Sprinter, Pössl Campster, Renault Trafic, SpaceCamper Limited, VW Caddy, VW Crafter, VW Grand California, VW ID.BUZZ, VW Multivan ("T7"), VW Multivan California ("T7"), VW T4, VW T5, VW T5 California Beach, VW T5 California Comfortline, VW T5 Caravelle, VW T5 Multivan, VW T5 Transporter, VW T6, VW T6 California Beach, VW T6 California Coast, VW T6 California Ocean, VW T6 Caravelle, VW T6 Multivan, VW T6 Transporter, VW T6.1, VW T6.1 California, VW T6.1 California Beach, VW T6.1 California Beach Camper, VW T6.1 California Beach Tour, VW T6.1 California Coast, VW T6.1 California Ocean, VW T6.1 Caravelle, VW T6.1 Multivan, VW T6.1 Transporter, VW new Transporter, others * |
VANZEIT®
#organiceyourvan in no time at all: Plug-And-Camp set-up for your campervan.Illustrations and photos are similar, subject to change and errors excepted.